The baby unit has infrared LEDs that allow you to see your baby clearly at night or in a dark room. When the infrared LEDs are on, the images are in black and white, and appears on the screen.
Turn on or off night vision
1. Press when the parent unit is idle.
2. Press ,
,
or
to choose
, then press
.
3. Press or
to choose Camera setting, then press
.
4. Press or
to choose Night vision, then press
.
5. Press or
to choose Set On/ Off, then press
.
6. Press or
to choose Auto, On, or Off, then press
to confirm your selection.
- If you set night vision to Auto, when the baby unit detects low light levels, the infrared LEDs are switched on automatically.
Set the brightness of night vision
1. Press when the parent unit is idle.
2. Press ,
,
or
to choose
, then press
.
3. Press or
to choose Camera setting, then press
.
4. Press or
to choose Night vision, then press
.
5. Press or
to choose Brightness, then press
.
6. Press or
to choose the desired brightness level, then press
to confirm your selection.
NOTES
- It is normal if you see a short white glare on your parent unit screen as the baby unit is adapting to the dark environment.
- When the infrared LEDs are on, the images are in black and white. This is normal.
TIP
Depending on the surroundings and other interfering factors, like lightings, objects, colors and backgrounds, the video quality may vary. Adjust the baby unit’s angle or place the baby unit at a higher level to prevent glare and blurry display.