Welcome to VTech Support

Enter your model number or search for information

Positioning the baby monitor - LM917-1B

 

 CAUTION_CAUTIONS_180112.png Caution

  • Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby’s crib or playpen.

 

NOTE_NOTES_180112.png NOTE

  • To avoid interference from other electronic devices, place your baby monitor at least 3 feet (1 meter) away from devices such as wireless routers, microwaves, cell phones and computers.

SharedScreenshot.jpg

1. Place the baby units more than 3 feet (1 meter) away from your baby.

SharedScreenshot2.jpg

2. Adjust the angle of the baby unit camera to aim at your baby.

  • Tilt - adjust camera angle manually.
  • Pan - press and hold ◄ or ► on the parent unit remotely.          SharedScreenshot3.jpg                         

3. Place the parent unit more than 3 feet (1 meter) away from the baby units to avoid screeching noise.

SharedScreenshot4.jpg

CAUTION_CAUTIONS_180112.png Caution

The default volume of your parent unit is level 3, and the maximum volume is level 5. If you experience high-pitched screeching noise from your baby monitor while positioning:

  • Make sure your baby units and parent unit are more than 3 feet (1 meter) apart, OR
  • Lower the volume of your parent unit.

 

Was this article helpful?
0 out of 0 found this helpful