Welcome to VTech Support

Enter your model number or search for information

What should I do if Out of range OR No pwr at base appears on my cordless handset?


  • Ensure you plug the telephone base in properly and the power is on.
  • Place the cordless handset in the telephone base for one minute to allow the cordless handset and base to synchronize.
  • Move the cordless handset closer to the telephone base. You may have moved out of range.
  • Reset the telephone base. Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to one minute for the cordless handset and telephone base to reset.
  • Other electronic products such as HAM radios and other DECT phones, can cause interference with your cordless phone. Try installing your phone as far away as possible from these types of electronic devices.
Was this article helpful?
10 out of 95 found this helpful