Before Use: Test and Position your Audio Monitor - DM1215/DM1215-2

Testing the audio monitor
You may test your baby monitor before initial use, and at regular times thereafter.

Caution
• For hearing protection, make sure the parent unit is more than 6.5 feet (2 meters) away from the baby unit. If you hear any feedback, move the parent unit further until the noise stops. You can also press  on the parent unit to lower or mute the noise.

1. Make sure your baby unit and parent unit are on.
2. Speak towards the microphone of the baby unit. You will hear your voice transmitting from the parent unit, and see the visual sound indicators light up.
   
   

Note
• When the parent unit displays NOT LINKED and flashes, move the parent unit closer to the baby unit while observing the minimum distance of 6.5 feet/2 meters.

Tip
• Increase the speaker volume of the parent unit if you cannot hear the sounds transmitted from the baby unit.

Positioning the baby monitor

1. Place the baby units more than 3 feet (1 meter) away from your baby.
   Caution
   • Keep the baby units out of the reach of your baby. Never place or mount the baby units inside the baby’s crib or playpen.
     
     
2. Place the parent unit more than 6.5 feet (2 meters) away from the baby unit.

Caution

• • The default speaker volume of your parent unit is level 3. If you experience feedback from your baby monitor while positioning:
    • Make sure your baby unit and parent unit are more than 6.5 feet (2 meters) apart, OR
    • Turn down the volume of your parent unit.
      

1. To avoid interference from other electronic devices, place your baby monitor at least 3 feet (1 meter) away from devices such as wireless routers, microwaves, cell phones and computers.